Coating CAN filler
Coating CAN fillerSystem characteristicsMade according to the standard QB/T2501-2000 Gravity Automatic Loading Scale;The contact material part is made of PPH and PTFE to prevent corrosion;The system i
- Brand::
- Model::
Coating CAN fillerSystem characteristicsMade according to the standard QB/T2501-2000 Gravity Automatic Loading Scale;The contact material part is made of PPH and PTFE to prevent corrosion;The system i
Coating CAN filler
System characteristics
Made according to the standard QB/T2501-2000 Gravity Automatic Loading Scale;
The contact material part is made of PPH and PTFE to prevent corrosion;
The system is manufactured with high-end electrical accessories such as Omron RELAY;
The front section of the filling gun is equipped with an additional pneumatic ball valve that automatically closes when not filled to prevent material leakage;
The sealing systems are all made of polytetrafluoroethylene, which is solvent resistant, acid and alkali resistant, and has a long service life;
The filling gun adopts an insertion type filling method to avoid causing materials to fly shallow on the barrel and affecting the outer packaging;
The system adopts a two-stage automatic filling method for large and small materials to improve accuracy;
After the single barrel filling value reaches, the filling gun will automatically lift and wait for the next start;
When the filling gun is not inserted into the barrel mouth, the filling gun automatically lifts and does not perform filling;
When filling, simply manually move the bucket to the weighing table, align it with the gun head, and press the start button to execute filling;
In case of emergency, press the emergency stop button to release this filling;
Automatic nitrogen filling to avoid material contact with air
Adopting one click operation: start - automatic peeling - dual speed filling - complete
Basic parameters
Maximum weighing capacity: 40kg;
Display division value: 10g;
Filling error: ± 10g;
Filling speed: approximately 300-350 barrels per hour/(25 liters depending on feed flow rate);
■ Power supply: AC380/220V (provided by the user to one side of the machine);
■ Gas source used: 0.6Mpa (provided by the user to one side of the machine);
Usage temperature: -10 ℃ -100 ℃;
Relative humidity:<95% (non condensing);
Control mode: 2nd gear control (with reflux control attached);